English
Bahasa Melayu
中文
Your supplement,
as powder.
An OEM supplement manufacturer in Malaysia blends your product as a powder under your brand. Bulk density sets the tub size rather than the net weight, so a 30-serving protein at 0.35 g/ml needs roughly twice the container volume of a collagen powder at 0.7 g/ml; NaViBiotech fixes the tapped density, works to JAKIM-recognised halal rules and files the NPRA dossier. Sampling takes two to three weeks.
Powder uses, halal certification and MOQ
Your supplement, as powder.
Powders carry large doses and flavour systems that capsules cannot. As an OEM supplement manufacturer in Malaysia, we make your product as powder under your brand — Halal-certified, NPRA-registered, and produced end-to-end from a low first run.
Sebagai kilang OEM supplement di Malaysia, kami menghasilkan produk anda dalam bentuk powder di bawah jenama anda — halal, didaftarkan, dan dibuat dari awal hingga akhir.
Powder to your spec
Powders carry large doses and flavour systems that capsules cannot.
Best for
Ideal for protein, collagen, greens, pre-workout and meal-replacement.
Halal & registered
JAKIM-recognised halal and NPRA registration — every run, legal to sell.
Low MOQ to start
Start with a small first run in this format, then scale as it sells.
Packaging included
Retail-ready, compliant packaging for your powder, with barcodes — ready to list.
Made end-to-end
Formulation, Halal, registration, packaging and manufacturing under one roof.
Certifications: GMP, ISO 22000, HACCP and JAKIM Halal
The group edge, on every order.
JAKIM-certified halal
Every product runs through a JAKIM-recognised halal system — the credential that opens Malaysia, the GCC and the wider Muslim market without a second audit.
Two origins, one standard
The same formula runs in Malaysia and in China to the same GMP and ISO 22000 spec. Take a Malaysia country-of-origin to hedge US–China tariffs, or balance cost and capacity across both.
Flexible MOQ
We size the minimum order around your launch, not the other way round. Start small to prove the market, then scale the product line as demand shows up.
Trusted by clients in 50+ countries
One team takes you from formula and design through NPRA registration and Certificate of Free Sale — with full product legalization in 24 markets, and clients in 50+ countries.
Powder manufacturing, registration and ownership
Powder that perform, and stay compliant.
We produce your powder to GMP and ISO 22000 with QA release on every batch, register them, and keep your formula exclusively yours.
See the brands we build →What you can rely on
- ✓ GMP- and ISO 22000-certified production
- ✓ In-house formulation & stability testing
- ✓ NPRA registration + Certificate of Free Sale
- ✓ Your formula, your IP, never resold
How the OEM process works, from idea to shelf
Three steps from idea to shelf.
Tell us the idea
Share the product, the market and your budget. A mutual NDA is in place from the first message — your concept stays yours.
We formulate & sample
We propose a formula, or adapt a proven one, cost it clearly, and produce a trial for you to taste, feel and approve.
We register & make
We handle NPRA registration and your Certificate of Free Sale, then manufacture to GMP and ship — locally or to 50+ export markets.
Blend uniformity, density and flow control
Powder blending, flow and dose accuracy
A powder gives you dose room a capsule cannot: 5 g to 30 g per serving, where a size 000 capsule holds roughly 1 g. That freedom moves the problem elsewhere. Blend uniformity, bulk density and moisture control decide whether every scoop delivers the label dose, and whether the tub still tastes right in month nine.
Blend uniformity
Segregation is the main powder failure. When actives and excipients differ sharply in particle size or density, the fine, heavy fraction migrates to the bottom of the drum during transport. Matching particle size across the blend matters more than mixing time.
Bulk density and tub fit
Bulk density sets the tub size, not the net weight. A 30-serving protein at 0.35 g/ml needs roughly twice the container volume of a collagen powder at 0.7 g/ml. Fix the tapped density before the packaging artwork is finalised.
Hygroscopic actives
Anything that pulls water clumps a tub within weeks. Hydrolysed collagen, inulin, magnesium and potassium citrates, free-form amino acids and ascorbic acid all draw moisture. Silicon dioxide or tricalcium phosphate at 0.5-2% keeps flow; a desiccant in the tub does the rest.
Wetting and dispersion
Fine powder floats and clumps in a shaker. Agglomerating the blend with soy or sunflower lecithin at 0.5-1% builds porous granules that sink and wet through. Straight micronised powder disperses badly in cold water however hard the consumer shakes.
Masking bitter actives
Powder hides nothing, so taste work is real formulation work. Branched-chain amino acids, ashwagandha and pea protein are bitter or astringent. Masking usually needs an acid, a sweetener and a flavour built together; changing one afterwards breaks the other two.
Formats
Powder suits doses above about 3 g: protein, collagen, greens, pre-workout, meal replacement. Below that, capsules are usually cheaper to fill and ship, and capsules and tablets can start from as few as 100 boxes. Loose-sachet runs start from around 10,000 sticks, so single-serve powder is a volume decision, not a test run.
Halal & sourcing
Whey protein is the powder-specific halal question: the rennet used to make the cheese it comes from can be animal-derived. Microbial-rennet whey, and vegetable-source magnesium stearate rather than tallow-derived, keep a tub inside a JAKIM-recognised halal system.
Frequently asked questions about OEM powder
OEM powder, answered.
Do you manufacture supplements as powder in Malaysia?
Yes — we produce supplements in powder under your brand, end-to-end: formulation, Halal, NPRA registration, packaging and production.
What is the minimum order for powder?
Low and sized to your launch. Some formats tool up more cheaply than others; tell us the product and we will give you an exact figure.
What products work best as powder?
Protein, collagen, greens, pre-workout and meal-replacement. We will advise whether powder is the best fit for your actives and price point.
Are your powder Halal-certified?
Yes — production runs under a JAKIM-recognised halal system throughout.
Can you handle packaging for powder?
Yes — we design and produce retail-ready, compliant packaging for powder, including barcodes for marketplace listing.
How do I start a powder supplement brand?
Bring the product idea; we formulate it, register it, package it as powder and manufacture it. Most brands start with one SKU and a small run.
Related OEM products
Where to next
Three GMP-certified factories in Malaysia and China
Three factories. Real addresses. One standard.
Plant I · Malaysia
Seri Kembangan, Selangor
Cyto Tech Sdn Bhd
11, Jalan Perindustrian Balakong Jaya 2/3, 43300 Seri Kembangan, Selangor
View on map →Makes
Granule & powder functional food — instant coffee & tea, meal replacement, collagen drink.
Plant II · Malaysia
Balakong, Selangor
Cyto Tech Wellness Sdn Bhd
54, Jalan Taming 8, Taman Taming Jaya, 43300 Balakong, Selangor
View on map →Makes
Powder, chewable-tablet & capsule supplements. Pharma-licensed for NPRA-registered and traditional medicines.
Plant III · China
Guangzhou, China
CytoTech Guangzhou
Xitian Science Park, No. 36, Bowen 2nd Street, Huangpu District, Guangzhou
View on map →Makes
Overseas production and sourcing for export programmes.
Combined annual capacity exceeding 500 million units across powder, tablets and capsules. Our Malaysian plants are Halal-certified, and we provide Halal application and certification as a service.
Want your product as powder?
Tell us the product — we will confirm whether powder is the right fit and quote it end-to-end.
Last reviewed 12 September 2026 · YB Leo, Founder